BOOO

[bezzabsa]

Well tomorrow loks like I'm under the RRC trying to work out why my EAS has decided to stop doing its job - went to lowest setting - and stayed there GRRRR
so need to sort out a way of either getting air in there manually and turning the eas off - or try and kick start the eas..
The pump appears to be working- as you can hear something under the drivers sill - but nothing else happens !

[Edge]

good luck

[waveydavey]

I had that on the P38, it was the compressor. Running but pumping no air, I took the discharge hose off and could easily hold my finger over the outlet with it running.

Took it apart (Very easy) put some vasaline ont he O'rings and the piston seal and ti has been fine ever since.

[bezzabsa]

I had that on the P38, it was the compressor. Running but pumping no air, I took the discharge hose off and could easily hold my finger over the outlet with it running.

Took it apart (Very easy) put some vasaline ont he O'rings and the piston seal and ti has been fine ever since.

need to work out how to remove compressor and its housing 1st