90 drive train

[way2deep]

just bought my first 90 td,i have a 200 td disco too ,,what donor parts should i take off disco and use for the 90 ...ie transfer box ,rear axle ,engine ,etc..
ps 90 is a 1989 and disco is 1991

[extreme90]

back axle bolts straight up
engine....depends what conversion you want to do....ie keep origional def g/box.....or use the disco g/box

transfer box wise.....depends what the 90 gonna be used for ?
offroading or just roadwork
offroading....keep the stock 90 tranny box 1.410 ratio
onroad..... fit the disco 1

dan

[way2deep]

thanks for the reply mate ...mostly on road /laning use really

[extreme90]

what tyres you planning on running ?
if your going be running 31 inch tyres the disco box aint gonna like it....unless you open the fuel pump up, tweak the turbo and then itll pull just fine
and before all you start saying it wont....jim ( some people on here no him, martha,fuddy and disco v8) his disco stands on 33inch insas atm and it will outdo a 300tdi 90 on 31 inch bf muds,

but he has got a full width cooler like me

but back on topic  :lol:

you could always fit the disco transfer box and just see how it goes, if you find that your always in 4th and cant seem to ever get 5th, tweak the engine (sensabily) and then see how it goes, if not refit the defender box.

i used to have a disco box in mine ages ago when 1st built and ran 31 inch grizzlys, and i could never get 5th...tweaked everything and got a 5th gear then i added a sh** load of weight onto it modding the whole landy and then i lost 5th so just changed the box

dan