24 to 10 spline

[bezzabsa]

ok can I fit a COMPLETE 10 spline RRC front axle to my 24 spline disco? as my front cv and swivel are knackered..and been offered a 10 spline at the right price....quick reply appreciated ;)

[hairyasswelder]

ABS? Vented disks, Both axles air or springs?

[bezzabsa]

non abs mine are solid disks - i think...and both on springs

[Bobtail]

ok can I fit a COMPLETE 10 spline RRC front axle to my 24 spline disco? as my front cv and swivel are knackered..and been offered a 10 spline at the right price....quick reply appreciated ;)

Check this out both axles and other bits still attached

includes diff swivels and so on only 99p :shock:

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ih=014&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=330101842325&rd=1&rd=1

[bezzabsa]

ok can I fit a COMPLETE 10 spline RRC front axle to my 24 spline disco? as my front cv and swivel are knackered..and been offered a 10 spline at the right price....quick reply appreciated ;)

Check this out both axles and other bits still attached

includes diff swivels and so on only 99p :shock:

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ih=014&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=330101842325&rd=1&rd=1

need to know about 10 spline comversion thanks ;)

[Range Rover Blues]

Yes you can
BUT you may have to fit the appropriate stub axles to match whatever else you fit inside.

Basically al the axles are the same lenght so you can mix and match to a degree.

[extreme90]

yes it will, but the break lines afink are different, the rrc has 2 breaklines to the caliper vs the disco 1 to the caliper...that depends on age of the disco tho

but all you'll need do is use your existing calipers

dan

[bezzabsa]

Yes you can
BUT you may have to fit the appropriate stub axles to match whatever else you fit inside.

Basically al the axles are the same lenght so you can mix and match to a degree.

will be fitting COMPLETE axle - apart from the calipers - those wil be my exisiting Disco ones......Oh well looks like I will be fitting another axle soon then :D:D - and while its off I may as well do the spring and shocks too - seeing as I have the 2" lift kit sat here :D:D..just need to get the readies together for some nice meaty tyres now :(