+2" Lift for Disco

[Steven]

Right its that time...

We go some big tyres which kinda fill up the wheel arch  :shock:

So for a standard, good lift for a good price, where would you recomend us?

[Disco_Stu]

I used Britpart 2" lift kit from paddocks.

Comes with 4 springs and 4 procomp shocks for about £210. You may need new front turret rings as a couple of studs usually snap, paddock can supply these or you can go to landrover, about £6.50 each.

Its quite an easy job until somthing snaps, rounds, goes wrong etc.

Good luck!

Stu.

[BigA]

I got my kit from www.mm4x4.com  this included the turret rings, as i had read allot of accounts of them breaking, and extended brake hoses. I also wanted Pro comp shocks and these worked out the best price at the time, but prices are very similar. They were very helpful, and a speedy delivery too.

Have fun fitting  :D

[Telaren]

just done mine last week.
Paid 100 for mine plus 30 to get the springs blasted and painted.

Check out my thread

http://forums.mud-club.com/viewtopic.php?t=42430

[Steven]

Thanks for the help people...

[hippi]

paddocks 314 + vat for 4xshocks extended bump stops braided hose pipes springs dislocation cones still saving for mine

[landroverkeith]

8) also got mine from mm4x4  nice chaps    getting  disc cones (wish id bought em at the time) and new bumps stops this payday

[Steven]

Hi Ya,

Where can i get a good set of extended brake hoses from?

Can't seem to find any...

[Littledan]

steven:
u want to get them from goodrich mate thats what we had on the 90

dan

[Lyndsey731]

Got mine from Mill Services, he will make to any length you need. I have +4 on the front and the rear is nearly 1 metre long. remember if you have a +2 lift and later fit -2 turrets +2 hoses will not be long enough. One other thing is you need to look at is the end fittings, ABS and non-ABS are supposed to be different (male or female). Land Rover being Land Rover mine is a non ABS model with ABS fittings!

Gav

[hippi]

they also come with the paddocks set

[Steven]

they also come with the paddocks set

Could you find me that set please  :)  

Sorry very bust at the mo

[hippi]

http://www.paddockspares.com/sp/category/SHOP_BY_BRAND_A-H/subcategory/Goodridge_Hoses/searchbox2/3__Suitable_for_Discovery_1.html
here is a link to get disco braided brake hose pipes (they are fir a disco 1)
not sure if they fit disco 3 but any problems ring paddocks they have loads of stuff that is not on there website

[hairyasswelder]

Hi Ya,

Where can i get a good set of extended brake hoses from?

Can't seem to find any...

Mine are Paddocks +4" in stock, £50 collected  8)

Steve

[Steven]

So just for sure, which ones should we get?

We have a 2"lift and is ABS.


Thanks for the help.

[hippi]

i wpuld get the +4 inch braided pipes that gives you enough lenght

[Steven]

i wpuld get the +4 inch braided pipes that gives you enough lenght

Ok then, thanks very much hippi !

Oh and this is the kit we have...

[Steven]

Sorry just for sure, which of these would you go for? *Bear in mind we have a 2" lift and the vehicle is ABS.

Which ones out of them, we want the +4" braded hoses by the way if thats right?

[Lyndsey731]

If your not sure give them a call, quote your chassis no. and requirements and let them do the rest. Just be careful when you fit them the ends can be very delicate!

Good luck

Gav

[Steven]

If your not sure give them a call, quote your chassis no. and requirements and let them do the rest. Just be careful when you fit them the ends can be very delicate!

Good luck

Gav

Ok then mate, we will do that then.


Cheers,