AuthorTopic: 200 tdi Front Axle  (Read 847 times)

0 Members and 2 Guests are viewing this topic.

Offline ScrapyJape

  • Posts: 39
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
200 tdi Front Axle
« on: June 28, 2007, 10:31:02 »
Just a quick question i got a 200 tdi defender and the front axle is fubar as of this morning  :(  just wondering if disco 1 or RRC axle will go on (ie same gearing in the diff) or do i need to get one from a 200tdi?
Never argue with a idiot. As they will only drag you down to there level and beat you with experience!>

Offline Xtremeteam

  • Regional Rep
  • *
  • Posts: 6476
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Its just the way i roll
    • lampeter, west wales
  • Referrals: 0
200 tdi Front Axle
« Reply #1 on: June 28, 2007, 18:50:27 »
the axle will go on but the calipers are different so swap your calipers onto the axles,
also the track rods & draglink are different so they would need swapped over from the def axle

gearing is exactly the same
Mike
I can Drive.. You can criticize..
I too can criticize like you.. but can you Drive like me??


Offline clbarclay

  • Posts: 1615
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
200 tdi Front Axle
« Reply #2 on: June 28, 2007, 22:37:27 »
I memeory servs me corectly a 200 TDI defende still used 48mm bushes in the radius arms, which was the same as RRC axle up to 1985 (when they went EFI). Later RRC/disco and 300TDI defenders axles used a wider bush 52mm in the radius arm, so by rights if you used a later spec axle you would need the radius arms changed as well. Having said that in theory you could fit wider bushes in a narrower arm, but it's not an ideal solution.
Chris

Various range rovers from 1986 to 1988 in various states
Locost sports car based on mk2 escort - currently working on brakes, fuel and wiring

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal