Topic: Finally did it (Read 4295 times)

gtomo2 · « **on:** July 08, 2007, 16:06:29 »

That is getting round to making a side exit for the exhurst. not a bad job even for a buchter like me. :(contented): :(shades):
Pics here
http://members.mud-club.com/profiles/gtomo2/gallery/080707

Frankie-Boy · « **Reply #1 on:** July 08, 2007, 16:10:02 »

Looks good Graeme,

Did you just loose the rear section and connect with the piece of flexy pipe?

gtomo2 · « **Reply #2 on:** July 08, 2007, 16:15:24 »

Yea just cut it off after the axle bend found the flexi pipe works better for routing it around then a bit of stainless steel pipe at the end so it looks nice

Frankie-Boy · « **Reply #3 on:** July 08, 2007, 16:25:41 »

Hmmm,

I've been thinking about doing something like that for a while myself.

Does it sound any different?

gtomo2 · « **Reply #4 on:** July 08, 2007, 16:54:34 »

Yea but mine is a v8 so it now has a nice low rumble :(shades):

wizard · « **Reply #5 on:** July 08, 2007, 17:11:24 »

Nice job.
Funny i was looking at mine yesterday, wondering how to bend a piece of pipe and fit it through the side panel.

Regards
wizard :twisted:

gtomo2 · « **Reply #6 on:** July 08, 2007, 19:52:01 »

Quote from: "Frankie-Boy"

Hmmm,

I've been thinking about doing something like that for a while myself.

Does it sound any different?

Have a listern its only on idle but you get the idea
http://s29.photobucket.com/albums/c257/gtomo2/vids/?action=view&current=V8Rumble.flv

Thrasher · « **Reply #7 on:** July 08, 2007, 19:57:53 »

Now...I wonder if I could modify all 4 of my tailpipes to come out of either side.... :twisted:

gtomo2 · « **Reply #8 on:** July 08, 2007, 20:00:59 »

Quote from: "Thrasher"

Now...I wonder if I could modify all 4 of my tailpipes to come out of either side.... :twisted:

Just get some stright through yank side pipes like on the corbras. Then give it a gently rev next to a chav in his 1.1 nover and watch his car fall to pieces :lol: 8)
Or have a chat with his little landy modding firm they may just be able to help you. this is what there little one sounds like
http://s29.photobucket.com/albums/c257/gtomo2/vids/?action=view&current=IMAG0021.flv

Disco_Stu · « **Reply #9 on:** July 08, 2007, 20:37:40 »

Top job mate, I like it.

Where did you get the flexi pipe from?

Stu.

gtomo2 · « **Reply #10 on:** July 08, 2007, 20:44:15 »

Its from a firm called "ces" (chester exhurst surpplies) they have depos all over the place. iirc it was Â£20 for a 10 foot lenght

Dave · « **Reply #11 on:** July 08, 2007, 21:14:50 »

Nice job mate does it rattle? mine is at the min carn't seem to stop it :roll:

gtomo2 · « **Reply #12 on:** July 08, 2007, 21:16:20 »

No rattle it fits nice and tight into the hole and the pipe clears all the metal at the back.

Guardian. · « **Reply #13 on:** July 08, 2007, 21:21:10 »

done a nice job of that!

Dave · « **Reply #14 on:** July 08, 2007, 21:22:36 »

I suspect it may be the body rattling on the pipe not the pipe rattling on the body so to speek

.

Look good mate

gtomo2 · « **Reply #15 on:** July 08, 2007, 21:24:13 »

Thanks.
FOund the body mount on mine had broke were it joins the rear mud flap bracket to the body work. Stuck i nice big selftapper in so think that could course a rattle

Disco_Stu · « **Reply #16 on:** July 08, 2007, 21:31:39 »

Tomo, are you mikes mate by any chance? If so what a strange coincidence.

I'll have to find a branch of CES near to me or pop into chester when i'm next going to wales.

Stu.

gtomo2 · « **Reply #17 on:** July 08, 2007, 21:33:43 »

Quote from: "Disco_Stu"

Tomo, are you mikes mate by any chance? If so what a strange coincidence.

I'll have to find a branch of CES near to me or pop into chester when i'm next going to wales.

Stu.

Which mike i know a mike from work which is hanson/redbank in measham

Disco_Stu · « **Reply #18 on:** July 08, 2007, 21:44:24 »

Mike from here:

http://www.landyworld.co.uk/

I emailed him yesterday to ask how he was getting on with his side exit project, he mailed back to say he wasnt, had sold the motor to his mate who was going to have a crack at it.

Then your post appeared and I thought.....No Way....

But its probably totally unconnected right? :)

Stu.

gtomo2 · « **Reply #19 on:** July 08, 2007, 21:46:32 »

No had my disco for about 2 years now so dont think its the same mike

mud-club-matty · « **Reply #20 on:** July 09, 2007, 12:13:25 »

im amate of mikes

BigA · « **Reply #21 on:** July 10, 2007, 15:53:20 »

Quote from: "Frankie-Boy"

I've been thinking about doing something like that for a while myself.

If you decide to give it a go Frank, let me know, i will be glad to give you a hand, and see how to do it to mine :?

landroverkeith · « **Reply #22 on:** July 11, 2007, 07:47:18 »

Quote from: "BigA"

Quote from: "Frankie-Boy"

I've been thinking about doing something like that for a while myself.

If you decide to give it a go Frank, let me know, i will be glad to give you a hand, and see how to do it to mine :?

Lol well the trick is to practise on franks car 1st and then when u know what not to do then u can do yours easy peasy ;)

BigA · « **Reply #23 on:** July 11, 2007, 07:55:52 »

Quote from: "landroverkeith"

Lol well the trick is to practise on franks car 1st and then when u know what not to do then u can do yours easy peasy ;)

didnt know you could read minds :lol:

News:

AuthorTopic: Finally did it (Read 4295 times)

Guardian.