Propshafts

[Yoshi]

Will the prop from a 1990 V8 Rangie with ZF autobox fit a 200tdi disco?

[chris9119]

Will the prop from a 1990 V8 Rangie with ZF autobox fit a 200tdi disco?

The simple answer is yes........, as long as the following apply: -

1. Its the correct length
2. It has four hole flanges on each end

Chris

[Yoshi]

Tried it yesterday afternoon and it would seem the 3.9 props are longer than the rest, looked on the paddocks site and there is 2 types of prop, one for diesels and 3.5 v8's, and one for 3.9/4.2EFI engines, so unfortunately it wouldnt fit!  Was about half an inch too long when at its shortest length.

[barmiebrumie]

I put a v8 prop on betty boo's  200tdi Disco a couple of month's ago & had no problems with it but it had got a 2' lift

[Yoshi]

This has a 2" lift on it, the thing is its only the 3.9/4.2EFI ones that are too long, the 3.5 ones are are the same as the diesel ones.

[Yoshi]

Right, well the 200tdi ones are too long as well off a rangie!  So it would seem anything up to 1988 on a rangie will fit a disco 1!!