This Wizardbilt Ground Anchor is similar to the Pul Pal in design.It is however slightly smaller to allow for easy storage and transportation.
The tubular frame is made from 50mm x 25mm x 3mm box section. It has a shackle point at the front to attach a winch cable to and another at the rear above the spade to assist in pulling the anchor out of the ground.
The spade section is 300mm x 350mm x10mm steel plate and has three locating positions depending on the terrain it is being used in.
A vertical position for sandy terrain, a horizontal position for use in rocky areas and a central position for general soft / boggy mud
The Wizardbilt Ground Anchor has been coated with hard wearing black temachlor, a rubber/plastic like paint.
The frame and spade are bolted together with two M12 countersunk stainless steel allen cap bolts.
£100 plus postage or collect.
The ground anchor weighs 23Kg so postage will be expensive.
regards
wizard
