AuthorTopic: viscous coupling / transfer box swap  (Read 1289 times)

0 Members and 1 Guest are viewing this topic.

Offline v8kenny

  • Posts: 694
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
viscous coupling / transfer box swap
« on: October 07, 2007, 18:26:51 »
My mates recently bought a classic with a viscous coupling transfer box
Trouble is the coupling's seized solid - have taken off front prop as a temp. measure for now
He can get hold of a transfer box with manual diff lock - is this an easy swap or should he keep looking for a box with viscous lock
Transfer box is from a 300 tdi hi cap pick up so may be a different ratio from his anyway - although his rangie is a factory tdi
The nice part of living in a small town is that when I don't know what I am doing, someone else does

Offline DEANO3528

  • Posts: 427
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
viscous coupling / transfer box swap
« Reply #1 on: October 07, 2007, 22:11:31 »
110 t/b ratio is lower so will benefit taller tyres. My mate has had this done on his Tdi RR. There are PITA issues with the linkages but nothing that can't be worked around if you have the bits (poss a earlier RR or Disco LT230 linkage is easiest).
Cheers
DEANO


Offline v8kenny

  • Posts: 694
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
viscous coupling / transfer box swap
« Reply #2 on: October 07, 2007, 23:42:06 »
Thanks Deano
I'm hoping we can get all the linkages for the t/box from the 110 - that's assuming they will be the same of course !
Will I need the t/box lever from the 110 too ?
The nice part of living in a small town is that when I don't know what I am doing, someone else does

Offline ChrisV8

  • Posts: 460
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
viscous coupling / transfer box swap
« Reply #3 on: October 08, 2007, 12:33:16 »
:lol: It's an easy job to change the viscous unit if you can find a decent one, took me a morning to do on daughters Classic. Details on Ashcrofts web site. But a recon viscous is about £250.00.

But, similarly it's not difficult to change the whole unit for one from a 90  or a 110. You will need all the linkages and best to have the levers as well. There's a good right up on changing a transfer here.

http://forums.lr4x4.com/index.php?showtopic=14601

http://forums.lr4x4.com/index.php?showtopic=6024

I also found it easier to make up the bracket for holding the box as detailed in the workshop manual. Takes a few hours to do the change.

Best of luck
1982 Range Rover 200tdi inside
1993 LR 90 rebuild Project
2008 Jeep Patriot wondrous 45mpg VW diesel powered 4x4 road car

Offline Dr Strangeglove

  • Posts: 137
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
viscous coupling / transfer box swap
« Reply #4 on: October 08, 2007, 19:30:06 »
Keep looking on ebay.  Mine was the same - just kept looking and I eventually got the coupling AND transfer box for nineteen quid.  I think I was lucky mind.  The one on before went for about forty five - but still not that bad.
Too many sins, not enough temptation!
Too many armpits, not enough deodorant!
Forget maths, forget geometry
You cause explosions by being good at Chemistry
Too many mountains, not enough volcanoes!
Too many lawyers, not enough justice!!!

Offline v8kenny

  • Posts: 694
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
viscous coupling / transfer box swap
« Reply #5 on: October 08, 2007, 23:40:32 »
Thanks Troops
Will keep you posted on which way we decide to go
The nice part of living in a small town is that when I don't know what I am doing, someone else does

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
viscous coupling / transfer box swap
« Reply #6 on: October 09, 2007, 11:31:12 »
Quote from: "Dr Strangeglove"
Keep looking on ebay.  Mine was the same - just kept looking and I eventually got the coupling AND transfer box for nineteen quid.  I think I was lucky mind.  The one on before went for about forty five - but still not that bad.


That's very good, I know prices aren't what they were but even a goosed one would fetch £150 a year or so ago.
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal