Pages: [1]   Go Down

AuthorTopic: Plastering  (Read 8758 times)

0 Members and 1 Guest are viewing this topic.

Offline hairyasswelder

  • Posts: 1351
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • It's gonna cost ya
  • Referrals: 0
Plastering
« on: October 20, 2007, 22:00:48 »
Is it possible to get a reasonable finish by slimming over textured paint?
How hard is it for a beginner? as I cant afford to pay silly money they seem to ask

Steve
Logged
'88 RR 3.5 efi, an on going project :o) evolving daily/slowly

Offline land-def-90

  • Posts: 173
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Plastering
« Reply #1 on: October 20, 2007, 22:49:42 »
Quote from: "hairyasswelder"
Is it possible to get a reasonable finish by slimming over textured paint?
How hard is it for a beginner? as I cant afford to pay silly money they seem to ask

Steve

hi steve if the textured paint is sound ie not peeling, bubbling and i asume you mean interier work then yes you can over scim, it will need 2 coats of diluted pva first. to be honest with you if you aint done it before get a tradesman to do it as it is an aquired skill. if you lived a bit closer i would have done it for you..good luck
Logged

Offline Boggert

  • Posts: 1408
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Plastering
« Reply #2 on: October 20, 2007, 22:50:34 »
Get a professional in...

I put most on the floor when I did it my self.
Logged
If want to walk it walk it, if you want to ride it ride it just leave me alone to drive it!

"Save The Cheer leader, save the world"

Offline The Smiths

  • Posts: 277
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Plastering
« Reply #3 on: October 20, 2007, 23:57:31 »
I disagree :evil:  Have a go yourself but buy a sander :lol:

Really I first skimmed over artex when I was 13.

But you will need the sander if you want to just emulsion the wall :)

Do your best in smoothing it but remember that you WILL have to sand it before decorating :wink:
Logged
If you always do what you have always done.
You will always get what you have always had.

Offline Yoshi

  • Posts: 2215
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Plastering
« Reply #4 on: October 21, 2007, 00:47:08 »
Or go to local diy store and buy the special wall smoothing stuff thats advertised on the telly which is specifically for smoothing over that kinda stuff :D
Logged


1995 Discovery XS 300TDi 4" lift and ready to go!

There is no devil, theres only god when he's drunk - Tom Waits.

Offline martha focker

  • Posts: 593
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Plastering
« Reply #5 on: October 21, 2007, 00:53:06 »
Quote from: "BadgersRover"
Or go to local diy store and buy the special wall smoothing stuff thats advertised on the telly which is specifically for smoothing over that kinda stuff :D


that stuff will take ages :wink:
Logged
don't worry i'm here

www.gotmud.co.uk

www.rib.net

Offline DaveDavies

  • Posts: 73
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Plastering
« Reply #6 on: October 21, 2007, 01:01:45 »
Have a go if you can't afford to get someone in - by the time you've skimmed out a whole house your be getting better...

Artex needs to be sound and PVA as stated above, get the skim on and flattish but don't play with it too much till it begins to set (but don't leave it too long) - depending on texture two costs may be required - when finishing off use a flat brush to 'flick' water on the wall which lets you to polish it up - spend a bit more time getting a decent job and it will save hours in sanding time :)
Logged
Dave

CRAG Member
Trust me I am a builder...

Offline hairyasswelder

  • Posts: 1351
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • It's gonna cost ya
  • Referrals: 0
Plastering
« Reply #7 on: October 22, 2007, 21:02:26 »
Got to have a go  :shock: already have sanders and stuff
It is definitly paint and it is a cieling so could be fun  :roll:
If worst happens I will just have to buy some textured paint  :wink:
Steve
Logged
'88 RR 3.5 efi, an on going project :o) evolving daily/slowly

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
Plastering
« Reply #8 on: October 22, 2007, 21:06:00 »
Artex might come off with a steamer, otherwise my mate did his lounge with a DeWalt random orbital sander, a beast of a thing it looks like it started life as an angle grinder :twisted:
Logged
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

Offline Gav_T

  • Posts: 181
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Plastering
« Reply #9 on: October 22, 2007, 21:21:02 »
EasyFill! Its mint stuff travis perkins sell the stuff in white and lime green bags. We use it at work cos every subby plasterer we use is a bit poo!

Gav.
Logged

Offline land-def-90

  • Posts: 173
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Plastering
« Reply #10 on: October 22, 2007, 21:21:43 »
not wanting to sound negative but ceilings are hard work for the inexperienced if i were you i would employ a plasterer, should only be a mornings work and no sanding down, but best of luck if you go for it.
Logged

Offline L90OOK

  • Posts: 1252
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Somerset
  • Referrals: 0
Plastering
« Reply #11 on: October 22, 2007, 21:26:23 »
If the missus can ice a cake then get her to do the smoothing off with the plastering... :wink:
Logged
Did everyone see that?  Because I will NOT be doing it again!

 

Offline Evilgoat

  • Posts: 2786
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Plastering
« Reply #12 on: October 22, 2007, 21:49:44 »
IIRC Some artex from back in the day contains asbestos fibres!

http://www.crazysquirrel.com/diy/asbestos.jspx
Logged
I must confess the the activities of the UK governments for the past couple of years have been watched with frank admiration and amazement by Lord Vetinari. Outright theft as a policy had never occured to him.

-- (Terry Pratchett, alt.fan.pratchett)

EX HK Police Mitsubishi Pajero 2.8TD
Audi S2 Avant 360bhp
Transit LWB 2.5di (The Shed)

Offline Jesska

  • Posts: 31
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Plastering
« Reply #13 on: October 23, 2007, 08:38:20 »
Quote from: "L90OOK"
If the missus can ice a cake then get her to do the smoothing off with the plastering... :wink:


I can actually  :lol:
Logged

Offline L90OOK

  • Posts: 1252
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Somerset
  • Referrals: 0
Plastering
« Reply #14 on: October 23, 2007, 09:11:57 »
Quote from: "Jesska"
Quote from: "L90OOK"
If the missus can ice a cake then get her to do the smoothing off with the plastering... :wink:


I can actually  :lol:


 :lol:  :oops: ...have a go & surprise him  8)
Logged
Did everyone see that?  Because I will NOT be doing it again!

 

Offline hairyasswelder

  • Posts: 1351
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • It's gonna cost ya
  • Referrals: 0
Plastering
« Reply #15 on: October 23, 2007, 21:42:58 »
Quote from: "L90OOK"
Quote from: "Jesska"
Quote from: "L90OOK"
If the missus can ice a cake then get her to do the smoothing off with the plastering... :wink:


I can actually  :lol:


 :lol:  :oops: ...have a go & surprise him  8)


No surprise now  :lol: (she only just over 5 foot, need a big ladder :lol:  :lol: )

It is definitely paint and I know the origin...... B&q 7 years ago when I did it in a hurry  :roll:  :roll:
Logged
'88 RR 3.5 efi, an on going project :o) evolving daily/slowly

Offline piggysteve

  • Posts: 523
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Plastering
« Reply #16 on: October 23, 2007, 21:55:05 »
Don't do what I did and use the missus cake spatula to smooth off some plaster. It was brilliant but apparently I should'nt have used it  :roll:  :roll:
Logged
Ex pat Yorkshireman.

P38 diesel

Offline L90OOK

  • Posts: 1252
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Somerset
  • Referrals: 0
Plastering
« Reply #17 on: October 23, 2007, 21:56:17 »
Quote from: "piggysteve"
Don't do what I did and use the missus cake spatula to smooth off some plaster. It was brilliant but apparently I should'nt have used it  :roll:  :roll:


PMSL  :(biglaugh):
I guess thats no more cakes for you  :shock:  :lol:
Logged
Did everyone see that?  Because I will NOT be doing it again!

 

Offline Jesska

  • Posts: 31
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Plastering
« Reply #18 on: October 24, 2007, 10:43:27 »
The cakes me and my nephew made yesterday..



Maybe I should just leave the plastering alone  :?
Logged

Offline L90OOK

  • Posts: 1252
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Somerset
  • Referrals: 0
Plastering
« Reply #19 on: October 24, 2007, 10:48:47 »
Quote from: "Jesska"
Maybe I should just leave the plastering alone  :?


They look great :D

You know you are going to have to take a pic of the ceiling now :lol: :shock:
Logged
Did everyone see that?  Because I will NOT be doing it again!

 

Offline Jesska

  • Posts: 31
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Plastering
« Reply #20 on: October 24, 2007, 10:53:26 »
The silver balls, hundreds and thousands and jelly diamonds could add some interest huh? :) lol
Logged

Offline richo

  • Posts: 452
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Plastering
« Reply #21 on: October 24, 2007, 22:05:50 »
If you want a good finsh pay a plasterer as you will never be able to work it.
Yes you can have a go but alot of my work is putting diyers ave a go work right after there wifes come home and cry after seeing the mess.
I know what alot of people have said about having a go,trust me you will not find it easy .and if you don't prep it right or get the mix right you will be fighting it.
Just remember while your at work earning money you can pay someone to do it for you and if it go's wrong its down to them to sort it out.
Logged
Jesus was a carpenter but god was a plasterer.

Offline DaveDavies

  • Posts: 73
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Plastering
« Reply #22 on: October 24, 2007, 22:11:47 »
A property developer I used to do a lot with thought plastering was easy - he went out and bought all the tools and had a go floating a wall whilst the plasters had a brew - after 5 minutes (mostly spent picking up stuff off the floor) he decided it wasn't worth the effort...
Logged
Dave

CRAG Member
Trust me I am a builder...

Offline Jesska

  • Posts: 31
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Plastering
« Reply #23 on: October 26, 2007, 19:07:08 »
Quote
there wifes come home and cry after seeing the mess.


Lol he has a Range Rover, I'm above worrying about mess now lol
Logged

Offline hairyasswelder

  • Posts: 1351
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • It's gonna cost ya
  • Referrals: 0
Plastering
« Reply #24 on: October 26, 2007, 19:29:10 »
Quote from: "richo"

Just remember while your at work earning money you can pay someone to do it for you and if it go's wrong its down to them to sort it out.


I really cant afford it  :roll:  so I got to try, even if I have to re texture it it got to be better than it is now  :?

Steve
Logged
'88 RR 3.5 efi, an on going project :o) evolving daily/slowly

Offline Ralph

  • Posts: 113
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Plastering
« Reply #25 on: October 26, 2007, 21:54:15 »
just stick new plasterboards over it
Logged

Offline land-def-90

  • Posts: 173
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Plastering
« Reply #26 on: October 27, 2007, 21:29:18 »
Quote from: "Ralph"
just stick new plasterboards over it

it will still need scimming
Logged

Offline hairyasswelder

  • Posts: 1351
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • It's gonna cost ya
  • Referrals: 0
Plastering
« Reply #27 on: November 04, 2007, 18:48:22 »
Quote from: "L90OOK"
Quote from: "Jesska"
Maybe I should just leave the plastering alone  :?


They look great :D

You know you are going to have to take a pic of the ceiling now :lol: :shock:


Needs painting now  :shock:
Few patchy bits but I can live with it  :D
Logged
'88 RR 3.5 efi, an on going project :o) evolving daily/slowly

Offline leo

  • Posts: 153
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Plastering
« Reply #28 on: November 04, 2007, 20:00:29 »
Logged

Offline leo

  • Posts: 153
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Plastering
« Reply #29 on: November 04, 2007, 20:01:29 »
Quote from: "leo"
http://www.british-gypsum.bpb.co.uk/products/plasterboard___accessories/gyproc_accessories/gyproc_easi-fill_45.aspx

great stuff drys quick sands easy if you lay it on right


we use it a lot and cant fault it ;)
Logged
Pages: [1]   Go Up
 





SimplePortal 2.3.5 © 2008-2012, SimplePortal