turbo

[needbeer]

that be the one i just wanted a pic to put my mind at rest

[extreme90]

get a picture up of your turbine,
IIRC they rotate clockwise
so  :roll:
the leading edge should be to the pass side, and the trailing edge to the drivers side ( each blades angle )
if you get what i mean  :lol:
or just do like i said and get a piccy up  :lol:
dan

[needbeer]

here you are it looks like the wrong way to me sorry about 2 same pics

[extreme90]

that looks right to me  :?

[needbeer]

its started doin my headin i only pulled it apart because lots of white smoke when i got the turbo off it was all chewed up so i sent it away so i pulled the head off give it a clean up i put it back together and now it sounds like one of the valves is bent and it seems like it blowing at the airfilter pipe what comes from the turbo can any one help with this one please shaun

[extreme90]

so you mean, when its running if you take the pipe off the air box
( air feed pipe to the turbo )
it seems to be blowing ?
is it making a funny burble noise ?
thats normal
take the hose of the inlet manifold and listen to the sound of it, it should sound like that from the airbox, except dampend a little

white smoke is generally head gasket, altho a cracked head or a cracked cyl wall/liner can do the same

dan

[needbeer]

it sounds like more of a thud noise quit loud never heard it befour it sounded sweet befour i pulled it apart

[extreme90]

thats what i mean, its hard to describe, a constant thudding noise ?
take the inlet pipe off and listen to it, then refit it, and the air filter and listen through the airbox

it should sound the same, just muffled

does it smoke at all now or is she fine ?
dan

[needbeer]

its allways smoked it never sounded like that befour you could hear the turbo spinning up and now its that thud ive got the turbo off at the min was going to pull the head back off tomorrow

[needbeer]

i think ive got to the bottom of my little prob i pulled the head off and i come a cross these

[extreme90]

errm
oh dear
how are the cam lobes ?
you gone fishing for the other bits yet ?
dan

[needbeer]

the cam looks ok ill go fishing tomorrow