Wheel Spacers

[DonH]

Just about to fit some 30mm wheel spcers to my D1 from Rakeway enginering;

is it best to just torque them up to 130 thingies or to do the same with some lock'n'seal as well???

Any thoughts greatfully apreciated.

[MudRat]

cover the backs in copper grease, otherwise they are a nightmare to get off again after a while, locktite on the nuts and torque em up,

[DonH]

Thanks, my thoughts exactly... and other council or advice from other is welcome please.

[ben_haynes]

as lee said but only put the Copper Grease on the hub flange as the grease moves around causing the Wheel / Spacer to come loose even with "loc-tite" on the studs :shock:

[muddydisco]

Just about to fit some 30mm wheel spcers to my D1 from Rakeway enginering;

is it best to just torque them up to 130 thingies or to do the same with some lock'n'seal as well???

Any thoughts greatfully apreciated.

When i brought my 40mm spacers from rakeway he said just clean the hub slighty grease and don't lock tight them. Just torque them up

[johnpirate]

I tighten mine up to wheel nut tightness.The wheel doesnt come off if you do it right :lol: