3 / 4 point harnesses

[mentalmoshio sophs V8i]

where do  u mount them to if u still wanna carrier passenger in the back seats? on a series one disco

[chris9119]

I'd mount them to the seat mounting frame bolts  :idea:  :doh:

[mentalmoshio sophs V8i]

any pics would be gr8 aint to tecky minded

[chris9119]

any pics would be gr8 aint to tecky minded

I don't have 3/4 point harness, so don't have pictures...., but the seat to seat frame has 4 mounting positions and the harness will have 4 mounting brackets, 1 for each bolt.......

Make sure there not twisted/crossed.....

[crazymac]

Won't you struggle with the top straps? they usually go to a cage mounting behind the driver, to get them on the seat fixings you would need to bring the straps all the way down the back of the seat!

[Bunnie]

i had 3 point harness in my old clio. other than the obvious of mounting them into the standard seat belt fittings i had them on a seatbelt connector in the rear... so while i had no rear passangers i could use them as they were connected to mountings through the rear seats. then when i did have passangers i could disconnect the harness and use the standard set belt.