well it was running ,but now not

[spud the king]

 OK   so what have i done wrong :oops:

its a 3.9 v8 in a 110  was working but it had a nasty miss fire  so  put new pugs and leads ,still miss firing, so went  to local garage  and they tried to advance the timing but they said that the diorama on the side  was at folt so got home and  tuck the bit off [not as bad has i thought ] but the little pin got stuck on the magnit  thing[ the call it they hot wire system i think]
so had to take the hole unit out , got the bits and went to put it back together  all was ok [i think]         
  but now it wont start ,got spark from coil  and got no spark at plugs , so am i right and think its the dizzy and cap or am i missing something   that i did wrong as i cant work it out  :oops: :oops: :oops:

[v8nut21]

have you had the cap off cheek that the center pin is still in the cap might just be that

[spud the king]

is that the little plastick bit thats under the dizzy thats  got a  lip on it

[v8nut21]

yep its a litile black pin in the center of the cap on the in side

[spud the king]

yep its all there inplace as it came apart

[R2D2]

Did you mark the distributor and block so as to put it back in exactly the same position as it came out, and are all leads in place and reconnected properly?