looking for a company that sells prebent axhaust angles

[flash42]

looking for a company that provides pre bents angles to fabricate my own straight through exhaust for my defender.
also has anyone got experience with flexible metal exhaust tubing for the same job.

cheers

flash

[Mark_Solesbury]

if you got a 90, get a late 300tdi back section.

Its a straight though pipe thats pre bent over the axle etc.

Then all you need is to make a mid section, which is a straight section about 70cm long.

[flash42]

im looking to have a side exit exhaust, coming out behind the passenger door.

[V8MoneyPit]

How about http://www.jetex.co.uk/.

I've bought bends, straights and silencers from them on a couple of occasions.

The 'bits' section is here:
http://www.jetex.co.uk/website/custom_parts.php

[andyb]

Can always chop up a few exhausts off scrappers. Should be cheap as chips :)

[bertie_bas205]

Think Demon Tweeks do em........



Bertie.

[ian_s]

i used the jetex parts mentioned above, and they are brilliant :)
the parts are well made, and clamp together really well

[Saffy]

There is web/mail order and normal walk-in shop at Castle Combe race track call merlinmotor sport. They do prefab exhaust sections. (They expect race sponsors to be forking out cash so NOTHING is cheap) http://www.merlinmotorsport.com/

[V8MoneyPit]

I seem to remember Merlin are a Jetex supplier, so you might as well go straight to Jetex.

[ian_s]

i bought my jetex parts from merlin motorsport, as once i had priced everything up, it was cheaper to buy from merlin
i was also buying other parts i could only get from merlin, so that might have tipped the balance