AuthorTopic: HD springs any ideas?  (Read 716 times)

0 Members and 1 Guest are viewing this topic.

Offline Disco-andy

  • Posts: 310
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
HD springs any ideas?
« on: December 08, 2008, 20:05:20 »
Im after some new springs for my 98 v8 disco 1, its only ever on the road and one day will need to tow my off roader.

What experiences have people had with diffrent make's, as im after some thing to help handling?

Dose any one know if RRC police springs will be ok? iv heard good things?

I cant afford OME,and iv had Yellow one and found them very soft? 

Offline AndyMacG

  • Posts: 71
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: HD springs any ideas?
« Reply #1 on: December 08, 2008, 20:19:37 »
Ive got the blue bearmach heavy duty springs on my disco   been on for 5 months and they seem ok, worst thing is the powder coating has started to flake off
1998  Jeep Cherokee Sport 4.0

Offline clbarclay

  • Posts: 1615
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: HD springs any ideas?
« Reply #2 on: December 08, 2008, 22:30:09 »
Given what you are asking for I would advise against the police spec springs for a RRC.

I'm not sure which springs the ploice used on the front, but the rears where the red/white stripe springs. These were stiffer than a standard RRC spring (designed to be used with the Boge SLU), but were also softer than standard discovery rear springs.


Personally for what you are asking I would go for a new set of genuine standard springs assuming the old ones are past their best. Also if not already fitted then add some anti roll bars will help reduce body roll. Every one has their own preferances and although I'm not against stiffer springs, I find standard suspesnion in good order to be a reasoanble compromise.
Chris

Various range rovers from 1986 to 1988 in various states
Locost sports car based on mk2 escort - currently working on brakes, fuel and wiring

Offline freeagent

  • Posts: 351
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: HD springs any ideas?
« Reply #3 on: December 09, 2008, 08:40:51 »
leave the fronts alone, and fit OEM discovery Mil-spec springs on the rear..
I've done this with mine and am well pleased with it...
(these springs were also fitted to Camel discos)
1996 300Tdi 3-Door Discovery...

H/D Steering rods, Steering guards, diff guards, discoparts H/D rear bumper, rocksliders with tree bars, 245/75r16 General Grabber AT2's..

Offline Disco-andy

  • Posts: 310
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: HD springs any ideas?
« Reply #4 on: December 09, 2008, 20:31:43 »
the problem is it sits much lower at the front and is all a bit wobbaly, as bad as my old off road lifted disco. so i have opted to put new standard springs on as they are cheep enough and were good enough when it was new.

Offline J B

  • Posts: 457
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: HD springs any ideas?
« Reply #5 on: December 09, 2008, 20:57:52 »
ive got the britpart heavy duty springs standard height ( though ive also got 20mm spacers under them )

and going from the britpart +2" yellows, i find the heavy duty's brillaint

handling is very good, though the shocks are procomp +2" es9000

so a harder shock than standard

as a side note, the tyres are 245/70/16 general grabber at2

i find this set up excellent in all situations  :cool:
300tdi disco

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
Re: HD springs any ideas?
« Reply #6 on: December 10, 2008, 01:06:31 »
Start with a decent set of shocks and see how it handles.
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

Offline MudPlugger

  • Posts: 87
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • I don't grow up, I just get bigger toys!
  • Referrals: 0
Re: HD springs any ideas?
« Reply #7 on: December 10, 2008, 02:20:42 »
Ive got the blue bearmach heavy duty springs on my disco   been on for 5 months and they seem ok, worst thing is the powder coating has started to flake off

Strange...I've got the BM blues and they're still pristine!!!

BM blues I reckon, nice road holding, good travel, not too hard but not wallowy...
200TDi Discovery
+2" Bearmach blue springs, +2" ProComp ES9000 Shocks, 31x10.50R16 Colway MT's, Heavy Duty steering arms, Safari snorkel, Midland CB radio, Extended bump stops, fully chequer plated rear.

Soon to have:
Full length roof rack, more lights than you can shake a stick at, +2" spacers, 2" lowered twin shock turrets, dislocation cones all round, Heavy duty bumpers. Possibly bigger tyres (Much bigger!!!) and more than likely body lifts etc.

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal