Pages: [1]   Go Down

AuthorTopic: sloppy box  (Read 932 times)

0 Members and 1 Guest are viewing this topic.

Offline doodsdad

  • Posts: 6
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
sloppy box
« on: January 29, 2009, 16:42:25 »
The gate for reverse has disappeared on my Rangy and also on my mate's Disco both are manuel boxes.
Is this a common fault and can it be easily sorted or is it a big job.???
Logged

Offline ChrisV8

  • Posts: 460
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: sloppy box
« Reply #1 on: January 29, 2009, 16:53:28 »
That will be the little plate under the gear lever assembly split in two, needs the top off the gearbox remove the plate weld it back together and refit.
Logged
1982 Range Rover 200tdi inside
1993 LR 90 rebuild Project
2008 Jeep Patriot wondrous 45mpg VW diesel powered 4x4 road car

Offline waveydavey

  • Posts: 757
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: sloppy box
« Reply #2 on: January 29, 2009, 16:56:10 »
Is it an LT77? - Reverse far left and forward?
If so its not that hard; you have to take the top cover off and there is a bracket with a  sprung plunger; change that.

Look At the back of the car as well; it also has the reversing light switch; when mine did it the reversing lights were permanently on
Logged
P38 Range Rover (BMW !!!)
Off Road camping Trailer - SA Design
And a boat - if you can call QM2 a boat?

Offline doodsdad

  • Posts: 6
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: sloppy box
« Reply #3 on: January 29, 2009, 20:55:29 »
Cheers boys
                     Thats Saterdays job then :dance:
Logged
Pages: [1]   Go Up
 





SimplePortal 2.3.5 © 2008-2012, SimplePortal