Topic: Lifted leafer WITH PICS!!! (Read 19769 times)

Little-Green-Machine · « **on:** July 21, 2009, 20:50:47 »

Just put my new rocky mountain springs on today :dance: With military shackles
Has anybody had prop problems when doing this? a friend had 3 inch lift done with shackles and it ate props. will mine be affected in the same way?
also the axle wedges to rectify the angles, where to get them from?
also snatch or stage one V8 Props? where to get them?
Cheers in advance Reece

lightweight-love · « **Reply #1 on:** July 22, 2009, 15:04:04 »

I run the same and do fair mileage, i personally don't think it affects the props too much, just keep them well greased and if one goes you can get a brand new rear prop for under £50 :)
Iv never managed to find axle wedges for a series but if you could find a plan could build some?
OOO nearly forgot, VERY IMPORTANT you lower your bump stops! i didn't so overstretched the front set and they were knackered and sagged right down :( expensive mistake. You need to lower them an inch to compensate for the military shackles, i haven't bothered on rear as they seem to be able to cope with it(3leaf)

Little-Green-Machine · « **Reply #2 on:** July 22, 2009, 17:51:13 »

thanks for that :D i managed to get some pro comp spring wedges off fleebay!
i found some flo flex poly lowered bump stops which i am going to get or make inch spacers for mine as they are new anyway, one thing my shocks seem to be at max articulation with very little movement which shocks would you recomend?
Cheers again Reece.

lightweight-love · « **Reply #3 on:** July 22, 2009, 22:25:55 »

You did? good work! what did you search under? id be interested to see how they do.
Im running pro comp es3000's 318546 on the front and 321546 on the rear, they extend just a fraction more than i get out of the springs, but 2leaves on rear might get more! the first 3 numbers is the extended length and the 6 means its a hoop fitting!

Little-Green-Machine · « **Reply #4 on:** July 22, 2009, 22:32:59 »

Thats brilliant cheers :D
two clicks on the highlift and my back wheels leave the floor :doh: iv got the two leaf package :D
I got the wedges here--->

http://cgi.ebay.co.uk/Spring-Degree-Wedges-Series-2-3-88-109-Land-Rover_W0QQitemZ280368901328QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item414749ecd0&_trksid=p3911.c0.m14&_trkparms=65%3A12%7C66%3A2%7C39%3A1%7C72%3A1683%7C293%3A1%7C294%3A50

Cheers again

lightweight-love · « **Reply #5 on:** July 23, 2009, 13:43:25 »

Hmm wedges! they seem good hope there thin enough so that the little spike on top of springs can go through the wedge and still rest inside the axle to center it!?
If you have the two leaf package you might need longer shocks on rear then! i used to run 322546 on the rear but one broke and i haven't been able to find an easy supplier but could provide an extra inch of drop if needed! best to take off shocks and test to the max. :lol:

TBM · « **Reply #6 on:** July 23, 2009, 14:52:22 »

Quote from: Little-Green-Machine on July 22, 2009, 22:32:59

Thats brilliant cheers :D
two clicks on the highlift and my back wheels leave the floor :doh: iv got the two leaf package :D
I got the wedges here--->

http://cgi.ebay.co.uk/Spring-Degree-Wedges-Series-2-3-88-109-Land-Rover_W0QQitemZ280368901328QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item414749ecd0&_trksid=p3911.c0.m14&_trkparms=65%3A12%7C66%3A2%7C39%3A1%7C72%3A1683%7C293%3A1%7C294%3A50

Cheers again

The seller is flogging off all the old Chris Perfect stock. Not sure if he bought it as a job lot, or was something to do with the company.

Little-Green-Machine · « **Reply #7 on:** July 23, 2009, 19:17:23 »

yea wondering which shocks the gon2far trucks ran? :-k
Paddocks do those shocks you mentioned for about 30 quid each!
I want some of the gon2far stuff :twisted:

Little-Green-Machine · « **Reply #8 on:** July 23, 2009, 21:13:29 »

I couldnt find anymore of the chris perfect stuff on there :-k
Maybe il remove the extended shackles to get more articulation.
im opening up a can of worms here..........not good when i have no job also :lol:

lightweight-love · « **Reply #9 on:** July 23, 2009, 22:24:47 »

I replaced the shocks an axle at a time as couldn't afford it lol, as the front flexs a lot less u may be able to put rear shocks froma 109 on there or something? just have a measure.
the extended shackles shouldn't affect articulation, i do have free-wheeling front hubs when on road tho which saves the front prop no doubt.

Little-Green-Machine · « **Reply #10 on:** July 23, 2009, 23:42:01 »

yea i allready run standard rear shocks on the front as they are an inch longer than the extended fronts rocky mountain offer,
i think il just put the extended pro comps on the rear and go from there. im gonna make up some spacers for my bumpstops as i found some inch box section.
then iv found some 20 inch long brake hoses which should suffice :twisted:
i want some freewheeling hubs at some point also.
Il put some before and after pics of the lift on tomorow as it is pretty different to standard.

Reece

Little-Green-Machine · « **Reply #11 on:** July 24, 2009, 14:07:42 »

The difference is quite noticeable, and yes in hindsight i should have washed it before doing it :doh:

lightweight-love · « **Reply #12 on:** July 24, 2009, 18:17:22 »

Looking good! problem is that the tyres end up looking smaller lol
Hope you like the paras now there on!

Little-Green-Machine · « **Reply #13 on:** July 24, 2009, 19:44:12 »

yea need 900's :twisted:
The paras are great but the back is rough as i have no travel lol.

Amma · « **Reply #14 on:** August 16, 2009, 10:11:51 »

You don't want 9.00's. You want some 265/75's and let me get the 9.00's

:lol:

I have fitted Rocky Mountain parabolics to my 109" with the extra leaf in the rear so it now has four back there. The front has extended dumb-irons which helps by moving the front end of the spring down and therefore tipping the nose of the diff upwards a little to keep the prop UJ's under as little strain as possible.

I also have the one-ton shackles but have changed my shocks for the one-ton type which are longer than standard 109" ones. The only thing is that the amount of travel of them doesn't seem to be all that much more than the originals but, having said that, it does alright when I get it onto the bumpy stuff.

:D

Little-Green-Machine · « **Reply #15 on:** August 16, 2009, 14:43:36 »

haha i want biiig tyres!
i found some pro comp axle wedges on fleabay and they have put the angle of the diff back to normal, also i took the extended shackles off and the back is no lower but the front is! so im thinking they could go back on just the front ?
but first 2 new props :roll: new brake hoses and longer shocks oh well bloody landrovers!

Spyderman · « **Reply #16 on:** August 22, 2009, 18:37:45 »

Quote from: Little-Green-Machine on July 24, 2009, 19:44:12

yea need 900's :twisted:
The paras are great but the back is rough as i have no travel lol.

Yea, yer need 900's

Little-Green-Machine · « **Reply #17 on:** August 22, 2009, 20:19:01 »

would love some but first some freewheeling hubs after the front prop decided to go bang, now having two new props . also i have no travel :lol: new shocks aswell lol and brake lines haha. but definatly some 900's :twisted:

yours is a beast with those things :shock:

fordlltwm · « **Reply #18 on:** November 02, 2009, 00:17:19 »

there's a bloke on the S2Club selling some 900 if you really want some, 100£ for a Set of 5

"900 x 16 9.00 x 16 Danubiana NATO pattern tyres for Land Rover Forward Control and 1 Ton models.

No idea how old these tyres are, as they came on my 2a FC when I bought it 5 years ago. There is very little wear on any of the tyres. According to our local tyre man, they are still all MOT legal, but they are starting to crack. Three have minor cracking, with the other two with more obvious cracking."

could put you in touch if ya want

Little-Green-Machine · « **Reply #19 on:** November 02, 2009, 14:11:12 »

would love to but i cant unfortunatly, seems everything else has decided to break all at once oh joy :roll:
thanks for the offer anyway :)

landy_bug · « **Reply #20 on:** November 10, 2009, 15:26:43 »

i have a set of freewheeling hubs that i am striping off an unwanted axle if you want them, send me a pm if you like

Amma · « **Reply #21 on:** November 17, 2009, 19:08:21 »

I'd be interested in the tyres if they're still up for grabs.

It's about all that needs doing to my Landy now to complete it as a one-ton replica.

However, it will also be getting a change of engine pretty soon too.

:D

Amma · « **Reply #22 on:** November 20, 2009, 18:33:57 »

Yay!

I got them.

Just need to get them fitted onto my wheels now.

:dance: :D :dance:

Little-Green-Machine · « **Reply #23 on:** November 21, 2009, 15:59:12 »

wicked! slap some pics up on here i wanna see :thumbup:

Artwigwa · « **Reply #24 on:** November 21, 2009, 15:59:31 »

Quote from: Amma on November 20, 2009, 18:33:57

Yay!

I got them.

Just need to get them fitted onto my wheels now.

:dance: :D :dance:

Luv the 900's :drool:

Dont forget to post some pics when you get them fitted! :dance:

Amma · « **Reply #25 on:** November 27, 2009, 09:33:07 »

Hmmm.

Having problems posting up some pics as they are too big to upload directly and every time I try and use Photobucket my pc goes ****-up.

:roll:

blade · « **Reply #26 on:** November 27, 2009, 13:52:30 »

Quote from: Amma on November 27, 2009, 09:33:07

Hmmm.

Having problems posting up some pics as they are too big to upload directly and every time I try and use Photobucket my pc goes ****-up.

:roll:

try image shack

MudLifeCrisis · « **Reply #27 on:** November 27, 2009, 23:08:55 »

Quote from: Amma on November 27, 2009, 09:33:07

Hmmm.

Having problems posting up some pics as they are too big to upload directly and every time I try and use Photobucket my pc goes ****-up.

:roll:

Try downloading this

http://bluefive.pair.com/pixresizer.htm

cooper956 · « **Reply #28 on:** November 29, 2009, 18:11:29 »

AMMA you copy cat i have 9.00`s first lol mines the origanal 1 ton wanabe lol

Amma · « **Reply #29 on:** November 30, 2009, 12:35:01 »

IIRC you got the 'cloverleaf' 9.00's that I was after (or was it the guy in Stockport?), but anyway the ones I have now are a lot better.....

.....'cos they're mine!!!

:lol: :lol: :lol:

Must get together again soon Mark and see what these two 109's can now get up to.

:D

News:

AuthorTopic: Lifted leafer WITH PICS!!! (Read 19769 times)