AuthorTopic: Diff ratio marking question  (Read 2184 times)

0 Members and 1 Guest are viewing this topic.

Offline Artwigwa

  • Posts: 162
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Diff ratio marking question
« on: November 18, 2009, 18:00:02 »
Hi all,

Where do I find the Diff Ratio Markings  :-. 

I need to fit one to the front but have three to chose from  :-k  I'm assuming the rear on my SWB S3 is 1.4:7

Regards

Offline bogie

  • Posts: 695
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • IF IT AINT GOT LEAFS,ITS NO GOOD!!!!!!!!
  • Referrals: 0
Re: Diff ratio marking question
« Reply #1 on: November 18, 2009, 20:24:56 »
Count the teeth mate!
1968 SERIES 2A ,200TDI TUNED,RANGE ROVER AXLES,ONE TON SHACKLES,CPC PARAS,ES3000,POLYBUSHED,ANACONDAS.                     1970 SERIES 2A, 200TDI TUNED,5 SPEED LT77 WITH LT230S TRANSFER BOX 1.211 RATIO.ZEUS DISKS ALLROUND.ES3000,MODIFIED 90 TANK,3.5 DIFFS.

Offline tack43

  • Posts: 351
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Worcs, Redditch
  • Referrals: 0
Re: Diff ratio marking question
« Reply #2 on: November 18, 2009, 21:55:32 »
Mark the gear, them mark and rotate the pinion. It should turn about 4 3/4 times for a 4.7:1 (series) diff or about 3 1/2 for a 3.54:1 (90/110, RRC, Disco) diff.

Hope this helps

Rich
Rich

1985 90 300TDI "Defender" SOLD.
1990 RRC 3.9 Vogue LPG
1991 RRC 3.9 Vogue SE "The spare parts box!" Broken for spares
1993 RRC Off-roader. No engine. Yet!
1991 RRC 3.9 Vogue SE "Tempory off-roader" Failed MOT - More spare parts
1992 RRC 3.9 Vogue SE "New tempory off-roader" SOLD

Offline Artwigwa

  • Posts: 162
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Diff ratio marking question
« Reply #3 on: November 24, 2009, 19:46:32 »
 :dance: Thanks for the tips, will have a look/count to find the correct diff!  :D

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal