Pages: [1]   Go Down

AuthorTopic: one shot leaking onto disc  (Read 793 times)

0 Members and 2 Guests are viewing this topic.

Offline stretchy

  • Posts: 414
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
one shot leaking onto disc
« on: December 21, 2009, 22:17:13 »

alright guys Ive got one shot grease leaking onto the front break disc im pretty sure its oneshot and not ep90 although im not %100. the swivle seems fine thers no noking or noises could this just be a bearing seal ??

thanks guys

stretchy
Logged
All the Gear, No Idea!

I break land rovers!
07716989933

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
Re: one shot leaking onto disc
« Reply #1 on: December 22, 2009, 12:56:54 »
Sounds like a bit like pressurising in the hub so checkthe breather too.  Unless the hub sealis utterly shot it takes a little bit of positive pressure to blow one-shot out od the hub, although one-shot does thin a lot after a while.  Check that the one-shot isn't diluted by EP90 as it's possible that diff oil is being blown into the hub.

If you strip the hub out then check the stub axle for pitting at the area the oil seal should be seating on, invariably a worn stub axle or rusty one will nto seal against a new oil seal for very long.

As me how I know :(
Logged
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

Offline clover

  • Posts: 550
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Clover
  • Referrals: 0
Re: one shot leaking onto disc
« Reply #2 on: December 22, 2009, 14:52:46 »
Is it your 0.99p garden centre DIY extended breather pipes? ROFL!!!

If its EP90 then the inner bearing seal is fubar. Remember we had to change mine for exactly the same reason.
Logged
1996 Discovery 300TDi Affectionately known as Clover. 
Cooper Discover STT 33/12.50/R15, a 2" body lift off chassis. H/D springs with 50mm platform spacers on the rear. Nothing on the front as they foul the shocks :-) 11" travel rough country shocks and mountings with dislocating spring cones,  adjusted wheel arches, safari snorkel. H/D rear bumper, demountable drop plate,. H/D steering guard, QT diff guards.
tree sliders, Split charge running twin Optima's, spotlight bar with 4 whoppers on it, H/D winch bumper, 12,000lbs winch,  A bar with 2 50w mini spotlights, brownchurch full length roof rack. 2 work lights.CB,
Fine English engineering modified to work!

Offline stretchy

  • Posts: 414
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: one shot leaking onto disc
« Reply #3 on: December 22, 2009, 21:38:14 »
hahaa say what you will .. id use macdonalds straws if they wear longer  :dance:
Logged
All the Gear, No Idea!

I break land rovers!
07716989933

Offline tack43

  • Posts: 351
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Worcs, Redditch
  • Referrals: 0
Re: one shot leaking onto disc
« Reply #4 on: December 22, 2009, 21:46:15 »
Also check your swivel pins for play/loose bolts as this will move the seal off the chome ball.

Rich
Logged
Rich

1985 90 300TDI "Defender" SOLD.
1990 RRC 3.9 Vogue LPG
1991 RRC 3.9 Vogue SE "The spare parts box!" Broken for spares
1993 RRC Off-roader. No engine. Yet!
1991 RRC 3.9 Vogue SE "Tempory off-roader" Failed MOT - More spare parts
1992 RRC 3.9 Vogue SE "New tempory off-roader" SOLD
Pages: [1]   Go Up
 





SimplePortal 2.3.5 © 2008-2012, SimplePortal