AuthorTopic: Help Needed  (Read 960 times)

0 Members and 1 Guest are viewing this topic.

Offline steveiboy

  • Posts: 38
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Nottinghamshire
  • Referrals: 0
Help Needed
« on: January 19, 2010, 13:14:42 »
Hi folks ive got a disco 2td5 over the last few days whilst driving the abs/traction control/brake warning light :'( has been coming on can anyone shed any light to what may be the problem and what i need too do to fix it many thanks :).
steveiboy

Offline disco2 td5

  • Posts: 219
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Help Needed
« Reply #1 on: January 24, 2010, 10:36:53 »
thers a problem with one of the abs sensors to find out which sensor it is it needs to be pluged in 
sometimes when the wheels barings are really worn they put the abs tc hill decent ( the 3 amigos ) so u could jack it up and have a feel at the barings see if thers play

Offline jimthelandyman

  • Posts: 447
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Help Needed
« Reply #2 on: January 24, 2010, 12:37:59 »
Sometimes an overlay harness and sensor needs to be fitted to the vehicle, take it to your local land rover dealer.

Offline john656

  • Posts: 263
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Malvern, Worcestershire
  • Referrals: 0
Re: Help Needed
« Reply #3 on: January 24, 2010, 18:36:03 »
I find a simple way to see if the abs sensor is faulty trace the wiring back connect an ohm meter between the 2 pins and try and spin the wheel at a constant speed, if one is miles out then....
As above check the wheel bearings first.
Thinking about it can u buy seperate sensors for these D2's?

John
My wife can't wrestle but you should see her box.

Offline disco2 td5

  • Posts: 219
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Help Needed
« Reply #4 on: January 24, 2010, 20:26:28 »
yea you can they aint exactly cheap and they need to be wired in all the way to the slabs ecu  near passenger foot well

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal