AuthorTopic: oil presure in a 3.9  (Read 10559 times)

0 Members and 1 Guest are viewing this topic.

bigruss

  • Guest
oil presure in a 3.9
« on: April 23, 2005, 18:24:12 »
hi all my oil presure when hot is about 1 3/4 going to about 2 when engine is working thought this is a little low ?????????  what should it be ???

Offline Xtremeteam

  • Regional Rep
  • *
  • Posts: 6476
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Its just the way i roll
    • lampeter, west wales
  • Referrals: 0
oil presure in a 3.9
« Reply #1 on: April 23, 2005, 19:33:46 »
is that bar?

mines is 40 psi when stone cold & sits at bout 25psi when either goin normall or hard,when its really hot it can drop down to 10 psi or less,although its neverstarted to rattle & the oil light has never came on in 6 months,
Mike
I can Drive.. You can criticize..
I too can criticize like you.. but can you Drive like me??


Offline hobbit

  • Posts: 4750
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
oil presure in a 3.9
« Reply #2 on: April 23, 2005, 23:37:50 »
Same here between 20/25 on a rrc, its only a 3.5 though, but I think thats the norm on these beasts
Kev

'91 stretch Discovery 200 Tdi
Hybrid for running round (got to go now)
Srs 3 Lightweight petrol (got to go)
Srs 3 Lightweight petrol, runabout

Not every problem can be solved with duct tape, and it's exactly for those situations we have WD 40

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
oil presure in a 3.9
« Reply #3 on: April 24, 2005, 13:56:38 »
What oil are you all using? the older V8 was designed to us 20w/50 and if you use anything thinner you will notice when it's hot, especially if it's worn.  Try adding some Wynns, or slick 50 (as a precaution).
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

Offline diesel_boy

  • Posts: 362
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • NUTTER
  • Referrals: 0
oil presure in a 3.9
« Reply #4 on: April 24, 2005, 23:53:16 »
soundslike u needa bit ofoil pump repair chat ! you  dont allways need a new oil pump  when u take off the oil pump cover get some fine emery cloth and put on a sanding blok and rub the oil pump coverback to smooth  as when the oil pump is in the weight of it whers aginst  the pump cover a scores it and the oil passes around the back of it this little task will take you about 2hrs depending how good you are with the spaners  anwhen its time to put it back together fill  the pump with vassaline to primethe pump ...   yes 20/50 is the correct oil for the engine  
2door rangie beeing bob'erd    
http://members.mud-club.com/profiles/diesel_boy
sam@northants4x4.com

Offline Xtremeteam

  • Regional Rep
  • *
  • Posts: 6476
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Its just the way i roll
    • lampeter, west wales
  • Referrals: 0
oil presure in a 3.9
« Reply #5 on: April 26, 2005, 18:08:38 »
i use halfords cheap 20/50 in mine along with some wynns oil additive to make it stickyer,cost me £10 for an oil change
Mike
I can Drive.. You can criticize..
I too can criticize like you.. but can you Drive like me??


Offline scooby

  • Posts: 201
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
oil presure in a 3.9
« Reply #6 on: April 27, 2005, 21:26:33 »
Quote from: "V8_redline7500"
i use halfords cheap 20/50 in mine along with some wynns oil additive to make it stickyer,cost me £10 for an oil change

i tryed but got a knocking sound from eng, my truck whanted the dear gear.
Marc and Annie
----------------
http://Http://members.mud-club.com/profiles/scooby/
defender and disco owner.
name of defender-betty boop

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
oil presure in a 3.9
« Reply #7 on: April 28, 2005, 22:11:25 »
Ours used shed loads, I buy a 25Litre (yes that's 25Litres folks) and when it's gone I change it.

So my oil doesn't hang around long enough to thin out.
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

Offline landyman Ash

  • Posts: 1661
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
oil presure in a 3.9
« Reply #8 on: April 29, 2005, 21:53:22 »
Mine runs at 40 when cold, 20 when hot and at idle even with fresh oil its can sit at around 5 with the oil pressure light flashing.

V8s are noturious for low pressure.  Changing the oil pump for me made no difference.  Shes quiet and runs a treat so not too fussed  :D
Ashley (but everyone knows me as Ash...)

Roxanne the 88" 300tdi auto Hybrid Trayback thats broken more than its fixed
Rosie the 300 Tdi auto disco that picks the hybrid up when broken...
Daisey the trailer that sits behind Rosie and lies under Roxanne.
The sexy threesome!!!!!!


Offline Xtremeteam

  • Regional Rep
  • *
  • Posts: 6476
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Its just the way i roll
    • lampeter, west wales
  • Referrals: 0
oil presure in a 3.9
« Reply #9 on: April 29, 2005, 23:15:33 »
well after last wknd when it got a sever kicking(5 1/2k 3rd low) when it was hot there was no pressure reading on the guage but the light never came on whatsoever n wasnt rattlin  :shock:
need to get more gg's so a 3.9 might b next
Mike
I can Drive.. You can criticize..
I too can criticize like you.. but can you Drive like me??


 






SimplePortal 2.3.5 © 2008-2012, SimplePortal