AuthorTopic: Speedo drive  (Read 2132 times)

0 Members and 2 Guests are viewing this topic.

Offline denzil

  • Posts: 65
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Speedo drive
« on: August 30, 2010, 20:54:52 »
Hi folks
I need some advice, started to change the transfer box on my 1996 3.9 for a 1.2 90 box today .The 90 box has a square speedo
cable drive the existing box has a small plug in the roughly the same position. Is there a square drive under the plug, if not any ideas
as to a way around this problem  ?.

Regards  Denzil

Offline SteveGoodz

  • Posts: 561
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Speedo drive
« Reply #1 on: August 30, 2010, 22:45:39 »
Denzil,

Your 1996 Discovery has an electronic speedo and the Defender has a mechanical one.

AFAIK they're not compatible.

Regards

Steve G
"Paddy" a 1996 3.9 V8 ES Auto Discovery
A re-imported Japanese model running on LPG

Offline Saffy

  • Posts: 3127
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +1/-0
    • The Bell Inn, Imber.
  • Referrals: 0
Re: Speedo drive
« Reply #2 on: August 31, 2010, 06:39:52 »
if both are LT230 boxes you should be able to swap the drives around, unless you mean by 'plug' a blank hole? - then no there is nothing underneath and there isn't any teeth on the driving gear either so can't machine blank to fit speedo drive.
« Last Edit: August 31, 2010, 06:42:33 by Saffy »
.swonk eno oN .esoht dna eseht ,siht dna taht ,wollof ot selur emos teg eW

Offline denzil

  • Posts: 65
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Speedo drive
« Reply #3 on: August 31, 2010, 07:06:31 »
Thank you saffy both 230 boxes, sorry I meant electrical type plug . I will carry on removing the existing box later if there is a chance I can swop the drives did not want to go to far if I was not going to be able to reconnect the speedo.

Regards Denzil

Offline Saffy

  • Posts: 3127
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +1/-0
    • The Bell Inn, Imber.
  • Referrals: 0
Re: Speedo drive
« Reply #4 on: August 31, 2010, 07:52:53 »
Thank you saffy both 230 boxes, sorry I meant electrical type plug . I will carry on removing the existing box later if there is a chance I can swop the drives did not want to go to far if I was not going to be able to reconnect the speedo.

Regards Denzil
it's popular to retro fit the defender TD5 speedo into an older tdi defender and also the electro-mechanical speedo pickup need to be swapped with the tdi's mechanical pickup, so that's what I base the comment 'if both are LT230 boxes you should be able to swap the drives around'.
.swonk eno oN .esoht dna eseht ,siht dna taht ,wollof ot selur emos teg eW

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
Re: Speedo drive
« Reply #5 on: September 01, 2010, 00:53:17 »
I've just fitted a B-W with electric speedo pickup.  The mechanical one has a short stud that has to come out but the inner gear was a pefect fit and 10 minuted work (rusted stud) saw it all fitted and working.

Hard dash 3.9 RRC and Disco had an electronic speedo driven by a sensor bolted to the chassis leg and driven by a 6" speedo cable.  The other end of the sensor can be used to drive a speedo cable ( VERY early 14CU/CUX equiped EFi cars had mechanical speedos).
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

Offline denzil

  • Posts: 65
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Speedo drive
« Reply #6 on: September 01, 2010, 19:40:57 »
Thank you rangerover blues for your reply, both you and saffy seem optimistic so i will carry on removing the transfer box on saturday and see how I get on .You may here from me again.

Regards Denzil

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal