AuthorTopic: G.C drivers door module  (Read 6563 times)

0 Members and 1 Guest are viewing this topic.

Offline tl1000rw

  • Posts: 17
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
G.C drivers door module
« on: August 18, 2011, 14:43:55 »
Hi Guys
I think my DDM is nackered I do not know if it has power going to it ( no elec windows no elect mirrors no central locking on drivers door) is this unit fed power with a single wire or are all components fed individually. If fed with a single wire anyone know what colour is it?

Offline Bishops Finger

  • Posts: 2196
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +1/-1
  • Referrals: 0
Re: G.C drivers door module
« Reply #1 on: August 28, 2011, 13:07:10 »
What age is the GC?.. Could be the body control module in the drivers footwell..
Jeep drivers don't eat quiche

Offline dxmedia

  • Posts: 1355
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +2/-2
  • Referrals: 0
Re: G.C drivers door module
« Reply #2 on: August 29, 2011, 08:30:46 »
IIRC they have a tendency to snap the wires going through the door hinge area. Run a continuity check on the wires each side of the hinge and replace the snapped ones with decent multi strand wire.
1959 Unimog 404 DoKa i6
1996 Jeep ZG i6with 6" suspension lift
1999 2.5 v6 Omega autobahn stormer
2001 1.4 Polo

Offline tl1000rw

  • Posts: 17
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: G.C drivers door module
« Reply #3 on: August 31, 2011, 12:30:57 »
Thanks to everybody who replied it was the thick black wire between the body and the door broken clean as a whistle
Thanks again

Offline Bishops Finger

  • Posts: 2196
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +1/-1
  • Referrals: 0
Re: G.C drivers door module
« Reply #4 on: August 31, 2011, 22:12:20 »
Result!
Jeep drivers don't eat quiche

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal