Topic: Latest Mods - What was the last thing you did? (Read 9455 times)

Foden34ke12 · « **on:** June 30, 2005, 16:27:56 »

I have created this thread for all to speak and tell us what the last thing they did to there truck... Be honest (not routine maintenance).

Here goes...

The last thing I did to my truck was install two rear spring spacers (boring) and change the lines for braided brake hoses...

Dave

fram · « **Reply #1 on:** June 30, 2005, 16:43:43 »

Would love to do some mods, but just doing my best to keep the old girl running at the moment!!!! For my birthday, from hubby, I had a new clutch, rear brakes and a re-con starter...and who says romance is dead!!!

Hoping to get the pipe from the air filter to the snorkel sorted this week-end, that's if we can beg some free pipe from somewhere!

Hightower · « **Reply #2 on:** June 30, 2005, 17:05:29 »

The last thing I did was have the bottom end of my engine fall apart . . . :?

fram · « **Reply #3 on:** June 30, 2005, 17:30:49 »

That's SOME mod!!!!

thumbs · « **Reply #4 on:** June 30, 2005, 19:12:40 »

latest mods as off last nite,

- spare tyre and wheel the same size as the other four,
- move number plate higher up as bigger spare covered it
- weld up at fit side exit exhaust

Manicminer · « **Reply #5 on:** June 30, 2005, 19:16:37 »

Fitted some heavy duty shocks on the front of the motor.

Hightower · « **Reply #6 on:** June 30, 2005, 19:22:59 »

Quote from: "Hightower"

The last thing I did was have the bottom end of my engine fall apart . . . :?

If we're talking 'proper' mods, it was the OME 2" lift.

Popeye · « **Reply #7 on:** June 30, 2005, 19:25:28 »

Hey Foden34ke12 did I meet you at the weekend at Stibbertoft with your mate in a sammy ?

donk_83 · « **Reply #8 on:** June 30, 2005, 20:31:20 »

the last time i did anything to the jeep was take it to a garge for a tiny bit of welding, that was over a month ago and its still not back !!!!!!!!!! :x

LandRoger · « **Reply #9 on:** June 30, 2005, 20:47:00 »

today i took out the back seats from the jimny,boarded out the floor with 6mm ply made and fitted a bulkhead 10mm ply boxed in wheel arches,made a locker to hold recovery kit and put carpet in loadspace,next weekend have a 2in pro-comp lift kit to fit ,springs es9000 shocks goodridge extentded brake hoses , plus KAP front bumper , if my mates back from holiday that is . :D

jims jimny · « **Reply #10 on:** June 30, 2005, 20:48:24 »

piper cross air filter/ snorkel
pro comp poly bush set

thats the latest to be fitted to the jimny

now waiting for some more pocket money off the wife

(you spend more on that than you do on me )

(more earache)

jim :roll:

jimny gary · « **Reply #11 on:** July 04, 2005, 20:02:20 »

ive got to fit my new castor corrected front radius arms at weekend to stop my jimny handling like a possessed tea trolley..... plus i need to make a new panhard after bending my old one like a banana........

Dan Sandbrook · « **Reply #12 on:** July 04, 2005, 22:56:04 »

i am yet to start on any mods cause i have no money ](*,) ... oh actually tell a lie I fabricated a bracket to mount my second alternator on

Foden34ke12 · « **Reply #13 on:** July 11, 2005, 15:59:24 »

Hey Popeye,

Yeah that was me....

Finally got my jeep back on the road now so we will have to sort out some driving days or summat.

PM or e mail if you are interested.

Also, Anyone else in the Ketering Area interested in laning / local playsites etc.

Dave

gate78 · « **Reply #14 on:** September 28, 2005, 15:45:02 »

just put me some wheel spacers on the cherokee, and bought an SJ410 for playing with, that will need a few bits changing, but nothing that would class as a mod. Plan on a 3" lift kit very soon cos they look so easy to do.

thumbs · « **Reply #15 on:** September 28, 2005, 18:36:54 »

i scraped the vit :D

tdci bob · « **Reply #16 on:** October 02, 2005, 16:21:41 »

i did a 2" lift to my sj the other day, then the engine went pop!

Andy the Landy · « **Reply #17 on:** October 02, 2005, 23:06:06 »

Bunged a new chassis under it 8)

suzota · « **Reply #18 on:** October 16, 2005, 20:40:14 »

swapped the 410 t case in my twin t case set up for a sammy one.
so i now have descent road gears.

Popeye · « **Reply #19 on:** October 16, 2005, 20:44:06 »

Quote from: "suzota"

swapped the 410 t case in my twin t case set up for a sammy one.
so i now have descent road gears.

I don't suppose your 410 t-case is for sale is it ?

How much do they go for if it isn't ? I'm trying to find one but don't know how much they are 2nd hand ?

suzota · « **Reply #20 on:** October 16, 2005, 20:53:29 »

give us a call on muddyjlx@gmail.com.

and we can talk prices if you are interested.

Maxeh · « **Reply #21 on:** October 17, 2005, 15:51:40 »

Wheel spacers and just starting to fit some MK2 Supra leather seats :) Wish me luck...

suzota · « **Reply #22 on:** October 18, 2005, 15:49:00 »

i moved the tail pipe today.it now clears the rear suspension shackle.

Foden34ke12 · « **Reply #23 on:** October 19, 2005, 09:40:10 »

You have got quite a machine there!! How was it fitting the toyota axles?

Dave

suzota · « **Reply #24 on:** October 19, 2005, 18:20:23 »

fitting the axles only took a week.
it was all the other bits that take forever.
my sugestion is to get all the bits you need first before you start the job, as waiting for parts can really hold you back.

jims jimny · « **Reply #25 on:** October 27, 2005, 16:18:04 »

new front bumper (at long last )

Maxeh · « **Reply #26 on:** October 27, 2005, 17:45:01 »

K&N air filter :)

davidlandy · « **Reply #27 on:** October 27, 2005, 18:16:34 »

HONK HONK

...air horns fitted

generation-x · « **Reply #28 on:** October 27, 2005, 20:13:25 »

just about to fit a sammy live front axle on gen-x :roll:

simon

jimbob · « **Reply #29 on:** October 27, 2005, 20:33:48 »

New rear x member, snorkel, steering guard. :)

News:

AuthorTopic: Latest Mods - What was the last thing you did? (Read 9455 times)